Additives for Polymers (v.2000, #10-11)
Publisher's note (2).
Company strategies (4-5).
New equipment (6-7).
Effect of coagent in reactive surface treatment for calcium carbonate filler in polypropylene (9-10).
Thermal degradation behavior and flammability of polyurethanes blended with poly(bispropoxyphosphazene) (9).
Graft polymerization of vinyl monomers initiated by azo groups introduced onto organic pigment surface (10).
Preparation of pigment-polymer hybrid particles for plastic colorants by dry-impact blending method (10-11).
Identification of flame retardants in polymers using curie point pyrolysis-gas chromatography/mass spectrometry (11-12).
Polypropylene-phenol formaldehyde-based compatibilizers. II. Application in PP/PA6 75/25 (wt/wt) blends (11).
Crystallization kinetics and thermal degradation behavior of low-density polyethylene blended with poly(bispropoxyphosphazene) (12-13).
Novel fabrication method of macroporous biodegradable polymer scaffolds using gas foaming salt as a porogen additive (13-14).
High-quality recycling (14-15).
Polymers with furyl groups at chain-ends: The use of 2-styrylfuran as an additive in radical polymerizations (14).
Dynamically formed poly (vinyl alcohol) ultrafiltration membranes with good anti-fouling characteristics (15).
Success through colour (15).
Preparation and performance of cellulose acetate-polyurethane blend membranes and their applications — II (15).
Arylamines substituted with 3,5-di-tertbutyl-4-hydroxybenzyl fragments: Synthesis and inhibiting properties (15).
Synthesis and characterization of novel optically active and flame-retardant heterocyclic polyimides (16-17).
Polyurethane/poly$LB @ bis (carboxylatophenoxy) phosphazene $RB blends and their potential as flame-retardant materials (16).
Synthesis and characterization of low molecular weight cut off ultrafiltration membranes from cellulose propionate polymer (16).
Effect of polymeric additives on the structure and permeability of poly(vinyl alcohol) asymmetric membranes (17-18).
One-stop shopping (17).
Effect of iodide additives on the polymerization of 2,6-dimethylphenol with copper bromide/ n-butylamine catalyst (18).
Functional hybrid fibers of cellulose/microcrystalline chitosan. I. Manufacture of viscose/microcrystalline chitosan fibers (18).
Effect of matrix graft modification using acrylic acid on the PP/Mg(OH)$-2$/ composites and its possible mechanism (21-22).
Fundamental neuer Mechanismus zur additiven Metallisierung von Polymeren in der Feinleitertechnologie am Beispiel von 3D-MIDs (Fundamentally new mechanism for additive metallization of polymeric substrates in ultra fine line technology illustrated for 3D-MIDs) (22).
Porous PVDF asymmetric hollow fiber membranes prepared with the use of small molecular additives (23).